RUBPLA FKM VITON A-75
Variants
Variants
| Item number | Length mm | Width mm | Thickness mm | Request |
|---|---|---|---|---|
| 1330066010 | 10,000 | 1,200 | 1 | |
| 1330066015 | 10,000 | 1,200 | 1.50 | |
| 1330066020 | 10,000 | 1,200 | 2 | |
| 1330066030 | 10,000 | 1,200 | 3 | |
| 1330066040 | 10,000 | 1,200 | 4 | |
| 1330066050 | 10,000 | 1,200 | 5 | |
| 1330066060 | 10,000 | 1,200 | 6 | |
| 1330066080 | 5,000 | 1,200 | 8 | |
| 1330066100 | 5,000 | 1,200 | 10 | |
| 1330066120 | 5,000 | 1,200 | 12 |
Description
RUBPLA FKM A-75 is a high-performance rubber sheet based on fluorocarbon rubber (FKM), also known under the brand name Viton®.This quality is distinguished by its excellent resistance to oils, fuels, solvents, and aggressive chemicals.The material retains its mechanical properties at extreme temperatures up to approximately +275°C, making it extremely suitable for the most demanding industrial environments.In addition, FKM offers low permeation and excellent compression resistance, resulting in a long service life and reliable sealing, even under severe conditions.
In short: a premium rubber sheet (Viton® type) for extreme chemical and thermal applications.
Application
- Chemical plants
- Petrochemicals and refineries
- High-temperature seals
- Fuel and oil systems
- Pump and valve applications
- Heavy-duty industrial seals
Choose RUBPLA FKM A-75 if you are looking for:
- Maximum chemical resistance
- High temperature resistance up to +275°C
- Excellent resistance to oil and fuels
- Good resistance to solvents
- Long service life under extreme conditions
- Reliable sealing under heavy load
- A premium solution where standard rubber falls short
Note: Not intended for applications where low cost is the deciding factor or for light applications where standard rubber suffices.
Product information
| Product specifications | Testmethode | ||
|---|---|---|---|
| Product group | Sheets | ||
| Production line | RUBPLA | ||
| Product type | FKM A-75 | ||
| Standard | ASTM D2240, ASTM D412, ASTM D624, DIN 53504, DIN 53505, DIN 53515, DIN 53517 | ||
| Applications | general, chemical resistant, gas resistant, oil and fuel resistant, UV resistant | ||
| Technical specifications | Testmethode | ||
|---|---|---|---|
| Hardness (°Shore A ±5°) | 75 | ||
| Tensile strength (MPa) | 4.90 | ||
| Elongation at break (%) | 200 | ||
| Temperature Range (°C) | -30 To 275 | ||
| Compression set (70°C / 24h / 25% ≤) | 35 | ||
| Tear resistance (kg/cm) | 20 | ||
| Construction | Testmethode | ||
|---|---|---|---|
| Rubber compound | FKM – also known as Viton® | ||
| Polymer base | fluorocarbon rubber | ||
| Polymer content (%) | 100 | ||
| Quality of construction | Type A | ||
| Form | sheet / roll | ||
| Surface | smooth on both sides | ||
| Color | black | ||
| Resistance | Testmethode | ||
|---|---|---|---|
| Ozone resistance | excellent | ||
| Solvent resistance | excellent | ||
| Resistance to acids | excellent | ||
| Base resistance | excellent | ||
| Resistance to (concentrated) acids/bases | excellent | ||
