RUBPLA PU EU-90
Variants
Variants
| Item number | Length mm | Width mm | Thickness mm | Request |
|---|---|---|---|---|
| 1355090010 | 2,000 | 1,000 | 1 | |
| 1355090020 | 1,000 | 2 | ||
| 1355090030 | 4,000 | 1,000 | 3 | |
| 1355090040 | 4,000 | 1,000 | 4 | |
| 1355090050 | 4,000 | 1,000 | 5 | |
| 1355090060 | 4,000 | 1,000 | 6 | |
| 1355090080 | 4,000 | 1,000 | 8 | |
| 1355090100 | 4,000 | 1,000 | 10 | |
| 1355090120 | 4,000 | 1,000 | 12 | |
| 1355090150 | 4,000 | 1,000 | 15 | |
| 1355090200 | 4,000 | 1,000 | 20 | |
| 1355090250 | 4,000 | 1,000 | 25 | |
| 1355090300 | 4,000 | 1,000 | 30 | |
| 1355090400 | 2,000 | 1,000 | 40 | |
| 1355090500 | 2,000 | 1,000 | 50 |
Description
RUBPLA PU EU-90 is a high-quality ester-based polyurethane rubber sheet developed for applications where the very highest mechanical demands are placed.This quality is distinguished by its exceptional wear resistance, very high tensile strength, and extreme tear resistance.Compared to softer PU grades, the 90 Shore version offers very high dimensional stability and compressive strength.In addition, the material offers almost plastic-like robustness while retaining its elastic properties, and is resistant to light oils, greases, certain solvents, ozone, and aging.
In short: an extremely wear-resistant and maximum load-bearing polyurethane for the heaviest industrial applications.
Application
- Heavily loaded wear plates and protective plates
- Scrapers and wipers (high load)
- Transport and bulk handling applications
- Seams under high pressure load
- Machine building and heavy industry
- Applications with extreme wear and impact load
Choose RUBPLA PU EU-90 if you are looking for:
- maximum wear resistance
- extreme mechanical load capacity
- very high pressure resistance and dimensional stability
- long service life under severe industrial conditions
- a solution where PU 70 and PU 80 are insufficient
- an almost synthetic-like robustness with elastic properties
Note: Not intended for high temperatures (> +80°C), strong acids and bases, or heavy chemical loads.
Ester-based PU is less suitable for:
Prolonged contact with water, humid environments, hot or wet processes, and hydrolysis-sensitive applications.
Product information
| Product specifications | Testmethode | ||
|---|---|---|---|
| Product group | Sheets | ||
| Production line | RUBPLA | ||
| Product type | PU EU-90 | ||
| Standard | ASTM D2240, ASTM D412, DIN 53504, DIN 53505, DIN 53516 | ||
| Applications | general, UV resistant | ||
| Technical specifications | Testmethode | ||
|---|---|---|---|
| Hardness (°Shore A ±5°) | 90 | ||
| Tensile strength (MPa) | 48 | ||
| Elongation at break (%) | 610 | ||
| Temperature Range (°C) | -40 To 75 | ||
| Wear resistance (DIN 53516, mm³) | 127 | ||
| Construction | Testmethode | ||
|---|---|---|---|
| Rubber compound | PU (polyurethane – EU quality) | ||
| Polymer base | polyurethane (ester base / EU) | ||
| Polymer content (%) | 100 | ||
| Quality of construction | EXC100 (Premium) | ||
| Form | sheet / roll | ||
| Surface | smooth on both sides | ||
| Color | ochre | ||
| Resistance | Testmethode | ||
|---|---|---|---|
| Ozone resistance | good | ||
| Solvent resistance | limited | ||
| Resistance to acids | limited | ||
| Base resistance | bad | ||
| Resistance to (concentrated) acids/bases | bad | ||
